Close
All Categories
    ISO 9001 Certification
    PrevTwill Narrow Weave Carbon F...
    NextTwill Narrow Weave Carbon F...

    Twill Narrow Weave Carbon Fiber Veneer 48" x 96"

    $787.32
    Upon request, sheet can be cut into 2 pieces sized 48" x 48" with purchase. This item must be shipped via freight.
    SKU: FDPLTWLNWV_4896
    *
    *

    DragonPlate real veneers are well suited for covering large surfaces or for decorative trim. This narrow twill weave twill (17 pic/inch) is similar to out standard twill veneer but is comprised of a finer weave. The gloss and matte finishes provide any project with a distinctive carbon fiber facade. Sheets are available as large as 4' x 8', yet the material forms into a cylinder as small as 1 inch. Can also be used for outdoor applications as we utilize a UV resistant resin that extends the life of the part and finish under sun exposure. Decals may simulate the look of carbon fiber from a distance, but up close there is little comparison to the DragonPlate finish.

    Please allow 5-7 days before this product ships.

    DragonPlate real veneers are well suited for covering large surfaces or for decorative trim. This narrow twill weave twill (17 pic/inch) is similar to out standard twill veneer but is comprised of a finer weave. The gloss and matte finishes provide any project with a distinctive carbon fiber facade. Sheets are available as large as 4' x 8', yet the material forms into a cylinder as small as 1 inch. Can also be used for outdoor applications as we utilize a UV resistant resin that extends the life of the part and finish under sun exposure. Decals may simulate the look of carbon fiber from a distance, but up close there is little comparison to the DragonPlate finish.

    Please allow 5-7 days before this product ships.

    Products specifications
    Sheet Size 48" x 96"
    Sheet Thickness Veneer
    Ply Orientation Woven 0/90
    Max Temperature 140 F
    Fiber Modulus Standard (33 Msi)
    Composition Solid CF (All Woven)
    Adhesive Backing Option? Yes
    Approx. Weight 5.313 lb
    Approx. Density 0.058 lb/in3
    Customers who bought this item also bought
    Twill Weave Carbon Fiber Veneer

    Twill Weave Carbon Fiber Veneer 48" x 96"

    FDPLTWLV_-UV*4896
    $683.10
    Upon request, sheet can be cut into 2 pieces sized 48" x 48" with purchase. This item must be shipped via freight.
    4896

    3M Scotch-Weld Epoxy Adhesive DP420NS Black 50ml Duo-Pak

    RMSCTHWLDDP420NSBLK1.7
    $49.75
    3M Scotch-Weld Epoxy Adhesive DP420NS is a black, non-sag, toughened, two-part epoxy adhesive. 2:1 mix ratio, 20 minute work life and handling strength in approximately 2 hours. Requires EPX Plus II applicator gun to dispense. 1.69oz/50ml
    4897

    3M Scotch-Weld Low Odor Acrylic Adhesive DP810, black 50ml Duo-Pak

    RMSCTHWLDDP810
    $33.50
    3M Scotch-Weld Low Odor Acrylic Adhesive DP810 is a toughened, two-part black acrylic adhesive. 1:1 mix ratio, 10 minute work life and handling strength in 20 minutes. Dispensed with 3M Scotch-Weld EPX II Plus Applicator. 50ml
    Plain Weave Carbon Fiber Veneer

    Plain Weave Carbon Fiber Veneer 48" x 96"

    FDPLV_-UV*4896
    $695.52
    Upon request, sheet can be cut into 2 pieces sized 48" x 48" with purchase. This item must be shipped via freight.
    Twill Weave Carbon/Kevlar (yellow) Veneer

    Twill Weave Carbon/Kevlar (Yellow) Veneer 24" x 48"

    FDPLKHV_2448
    $322.47

    DRAGONPLATE CUSTOMERS

    U.S. Army
    Woods Hole Oceanographic Institution
    NASA
    Northrup Grumman
    United States Department of the Navy
    Raytheon
    Gibson
    Bell Helicopter
    Information
    Customer service
    My account
    Contact Us
    • 321 Route 5 West, Elbridge, New York 13060
    • 315-252-2559
    • Mon-Fri 8:30am - 5:00pm ET
    Copyright © 2024 DragonPlate. All rights reserved.