Close
All Categories

    Twill Narrow Weave Carbon Fiber Veneer 48" x 96"

    $675.00
    Two free linear saw cuts with sheet purchase.
    Part Number: TWLNRWVENEER48x96
    *
    *

    Please Allow 5-7 days before this item ships

    DragonPlate real veneers are well suited for covering large surfaces or for decorative trim. This narrow twill weave twill (17 pic/inch) is similar to out standard twill veneer but is comprised of a finer weave. The gloss and matte finishes provide any project with a distinctive carbon fiber facade. Sheets are available as large as 4' x 8', yet the material forms into a cylinder as small as 1 inch. Can also be used for outdoor applications as we utilize a UV resistant resin that extends the life of the part and finish under sun exposure. Decals may simulate the look of carbon fiber from a distance, but up close there is little comparison to the DragonPlate finish.

    Please allow 5-7 days before this product ships.

    DragonPlate real veneers are well suited for covering large surfaces or for decorative trim. This narrow twill weave twill (17 pic/inch) is similar to out standard twill veneer but is comprised of a finer weave. The gloss and matte finishes provide any project with a distinctive carbon fiber facade. Sheets are available as large as 4' x 8', yet the material forms into a cylinder as small as 1 inch. Can also be used for outdoor applications as we utilize a UV resistant resin that extends the life of the part and finish under sun exposure. Decals may simulate the look of carbon fiber from a distance, but up close there is little comparison to the DragonPlate finish.

    Please allow 5-7 days before this product ships.

    Products specifications
    Sheet Size 48" x 96"
    Sheet Thickness Veneer
    Adhesive Backing Option? Yes
    Ply Orientation Woven 0/90
    Composition Solid CF (All Woven)
    Max Temperature 140 F
    Fiber Modulus Standard (33 Msi)
    Customers who bought this item also bought

    3M Scotch-Weld Epoxy Adhesive DP420NS Black 37ml Duo-Pak

    RMSCTHWLDDP420NSBLK2
    $25.45
    3M Scotch-Weld Epoxy Adhesive DP420NS is a black, non-sag, toughened, two-part epoxy adhesive. 2:1 mix ratio, 20 minute work life and handling strength in approximately 2 hours. Requires EPX Plus II applicator gun to dispense. 37ml

    3M Scotch-Weld Low Odor Acrylic Adhesive DP810, black 50ml Duo-Pak

    RMSCTHWLDDP810
    $23.40
    3M Scotch-Weld Low Odor Acrylic Adhesive DP810 is a toughened, two-part black acrylic adhesive. 1:1 mix ratio, 10 minute work life and handling strength in 20 minutes. Dispensed with 3M Scotch-Weld EPX II Plus Applicator. 50ml

    3M Scotch-Weld EPX 10:1 Plunger

    3m-69044
    $11.00