Frequently Asked Questions
Product Information: 0.75" Modular Square Tube Connectors
What are DragonPlate 0.75" Modular Square Tube Connectors?
DragonPlate 0.75" Modular Square Tube Connectors are lightweight anodized aluminum connectors designed to join DragonPlate 0.75" inner diameter (ID) square carbon fiber tubes. They enable users to create lightweight, rigid, and modular structures by adhesively bonding the connectors into the tube ends. Note: These connectors are specifically engineered for DragonPlate 0.75" ID square tubes and may not be compatible with tubes from other manufacturers.
What materials are used in the 0.75" Modular Square Tube Connectors?
All 0.75" Modular Square Tube Connectors are made from anodized aluminum, providing a balance of strength, corrosion resistance, and low weight. Note: These connectors are not made from carbon fiber themselves; they are designed to interface with carbon fiber tubes.
Which tubes are compatible with the 0.75" Modular Square Tube Connectors?
These connectors are specifically designed for DragonPlate 0.75" inner diameter (ID) square carbon fiber tubes. Compatibility with tubes from other manufacturers is not guaranteed. Note: Using non-DragonPlate tubes may result in improper fit or reduced structural integrity.
How are the 0.75" Modular Square Tube Connectors installed?
The connectors are adhesively bonded into the ends of the carbon fiber tubes using a recommended epoxy adhesive, such as 3M Scotch-Weld 2216. This method creates a strong, permanent bond without the need for welding or specialty bonding techniques. Note: Proper surface preparation and adhesive curing are required for optimal strength; see technical documentation for details.
What types of connectors are available for 0.75" square tubes?
DragonPlate offers a range of modular connectors for 0.75" square tubes, including short and standard threaded end connectors, modular cubes (3-way, 4-way, 5-way, 6-way), ball joint nut locks, and universal utility adapters. Each connector is designed for specific structural configurations and uses a 1/4-20 thread size. Note: Not all connector types may be suitable for every application; review technical specs before selection.
Pricing & Ordering
What do the 0.75" Modular Square Tube Connectors cost?
Pricing for 0.75" Modular Square Tube Connectors varies by type:
• 0.75" Short Square Threaded End Connector: $21.29
• 0.75" Square Threaded End Connector: $15.50
• 1" Modular 6-Way Cube: From $14.01
• 1" Modular 3-Way Cube: From $15.11
• 1" Modular 4-Way Cube: $16.24
• 1" Modular 5-Way Cube: $13.97
• Ball Joint, Nut Lock, 1/4-20: From $20.90
• Universal Utility Adapter: From $13.70
Prices are subject to change; see the product page for current pricing. Note: Taxes, shipping, and adhesives are not included in the listed prices.
Features & Capabilities
What are the key features of DragonPlate modular connector systems?
Key features include:
- Lightweight anodized aluminum construction for strength and corrosion resistance
- Modular design for easy assembly and disassembly of rigid structures
- Adhesive bonding (no welding required)
- Compatibility with DragonPlate 0.75" ID square carbon fiber tubes
- Multiple connector types for various structural configurations
Note: Modular connectors require adhesive bonding and are not suitable for high-temperature or load-critical applications without engineering review. Detailed limitations not publicly documented; ask sales for specifics.
What problems do DragonPlate modular connectors solve?
DragonPlate modular connectors address common challenges such as:
- Joining carbon fiber tubes into rigid structures without welding or specialty bonding
- Reducing assembly complexity for modular frames and structures
- Enabling rapid prototyping and reconfiguration of assemblies
Note: For applications requiring extreme loads or environmental exposure, consult engineering support for suitability.
Use Cases & Applications
Who can benefit from using 0.75" Modular Square Tube Connectors?
Engineers, product designers, and researchers in fields such as robotics, aerospace, industrial automation, and research institutions can benefit from these connectors. They are ideal for building lightweight, modular frames, test rigs, and prototypes. Note: Not recommended for permanent, load-critical, or high-temperature installations without engineering validation.
Are there any case studies or examples of modular connectors in use?
DragonPlate modular connector systems have been used in applications such as wall-climbing robots (in collaboration with International Climbing Machines), drone test bed systems (with Eureka Dynamics), and research projects involving modular frames. See the Eureka Dynamics case study and ICM robotics project for details. Note: Case studies may cover broader modular systems, not exclusively 0.75" connectors.
Technical Requirements & Documentation
Where can I find technical documentation and CAD models for 0.75" Modular Square Tube Connectors?
Technical documentation, including CAD models and weights/specs, is available on the DragonPlate CAD Models Download Page and Weights and Specs Page. For adhesive recommendations, see the 3M Adhesives Catalog. Note: Always verify the latest documentation for your specific connector type.
What adhesive is recommended for bonding the connectors?
DragonPlate recommends using 3M Scotch-Weld 2216 epoxy adhesive for bonding modular connectors to carbon fiber tubes. This adhesive provides a strong, durable bond suitable for most structural applications. Note: Adhesive selection may vary based on environmental and load requirements; consult technical documentation for guidance.
Support & Implementation
How easy is it to assemble structures using 0.75" Modular Square Tube Connectors?
Assembly is straightforward: connectors are bonded into tube ends using epoxy, and the modular design allows for rapid assembly and disassembly of structures. No welding or specialty tools are required. Note: Proper adhesive curing time is necessary before loading the structure; see adhesive instructions for details.
What support resources are available for customers?
Customers can access technical documentation, CAD models, and FAQs on the DragonPlate website. For personalized support, contact DragonPlate at service@dragonplate.com or call 315-252-2559 (Monday–Friday, 8:30am–5:00pm ET). Note: Engineering support is recommended for custom or load-critical applications.
Compliance & Certifications
Are DragonPlate modular connectors manufactured under any quality certifications?
All DragonPlate products, including modular connectors, are manufactured under ISO 9001:2015 quality standards at the Elbridge, New York facility. This certification ensures consistent quality and traceability. Note: Product-specific compliance details are available upon request.
DragonPlate lightweight tube connectors provide an easy and robust method for connecting our
