Close
All Categories

    1" Carbon Fiber Tangent Tube Mount™ - 12" Long

    $59.50
    Part Number: FDPCK-MC1-TTM*12

    The Tangent Tube Mount™ makes it easy to attach a carbon fiber tube to a plate or other flat surface. The curved portion of the mount is bonded to a carbon fiber tube, and the flat side is bonded/bolted to the plate.

    In addition, using two tangent tube mounts per tube, two or more plates can be joined together at the edge allowing the creation of both inside and outside corners.

    The Tangent Tube Mount™ can also be utilized to facilitate the attachment of a round tube to the side of a truss, frame structure, or square tube.

    These brackets are well suited for mounting carbon fiber tubes in robotic end effectors, electronic rack shelving, support plates for scientific equipment, table tops, UAV’s and many other applications.

    The Tangent Tube Mount™ makes it easy to attach a carbon fiber tube to a plate or other flat surface. The curved portion of the mount is bonded to a carbon fiber tube, and the flat side is bonded/bolted to the plate.

    In addition, using two tangent tube mounts per tube, two or more plates can be joined together at the edge allowing the creation of both inside and outside corners.

    The Tangent Tube Mount™ can also be utilized to facilitate the attachment of a round tube to the side of a truss, frame structure, or square tube.

    These brackets are well suited for mounting carbon fiber tubes in robotic end effectors, electronic rack shelving, support plates for scientific equipment, table tops, UAV’s and many other applications.

    Products specifications
    Thickness 0.0625"
    Leg Length 1"
    Length 12"
    Ply Orientation Woven 0/90
    Max Temperature 140 F
    Fiber Modulus Standard (33 Msi)
    Finish Texture/Texture
    Composition Solid CF (All Woven)
    Approx. Weight 1.420 oz
    Customers who bought this item also bought

    3M Scotch-Weld Epoxy Adhesive 2216 B/A Gray Tube Kit

    RMSCTHWLD2216TB
    $52.50
    Highly Flexible, Two-Part Adhesive Kit highly recommended for DragonPlate bonding. Available tube or pint kit size.

    Carbon Fiber Roll Wrapped Twill Tube ~ 0.625" ID x 48", Gloss Finish

    FDPT.625*.75*48
    From $41.28
    Use this tube with our Modular Connector System to create complex structures.