Close
All Categories

    Airex C70-40 1" Foam Core - 3 Layer Carbon Fiber 12" x 24"

    $213.30
    SKU: FDPLAXC7040-1x3_1224
    *

    DragonPlate carbon fiber C70-40 Airex foam core is a unique closed cell, cross-linked polymer foam core. This is a lightweight structural foam that has good impact strength. While great for high strength applications which require a low panel weight, this is a carbon fiber foam core laminate that can resist crushing forces and supply an adequate mounting surface. The lay-up design is quasi-isotropic, consisting of three layers of carbon fiber on each side of a 1" Airex foam core center. Available in gloss, matte or texture on one side and texture on other side for bonding to other surfaces. For foam specifications, please refer to the official Airex Data Sheet.

    DragonPlate carbon fiber C70-40 Airex foam core is a unique closed cell, cross-linked polymer foam core. This is a lightweight structural foam that has good impact strength. While great for high strength applications which require a low panel weight, this is a carbon fiber foam core laminate that can resist crushing forces and supply an adequate mounting surface. The lay-up design is quasi-isotropic, consisting of three layers of carbon fiber on each side of a 1" Airex foam core center. Available in gloss, matte or texture on one side and texture on other side for bonding to other surfaces. For foam specifications, please refer to the official Airex Data Sheet.

    Products specifications
    Sheet Size 12" x 24"
    Core Material Gurit PVC40 Foam (Airex)
    Ply Orientation Woven 0/90 and ±45
    Max Temperature 140 F
    Fiber Modulus Standard (33 Msi)
    Composition CF (Woven) and Core
    Approx. Weight 1.432 lb
    Approx. Density 0.0047 lb/in3
    Customers who bought this item also bought

    Bondable Stud Fastener #8-32

    FDPBF8-32-8CR
    $12.75
    1/2" length

    3M Scotch-Weld Epoxy Adhesive DP-2216 Gray 41.5ml Duo-Pak

    RMDP2216DUOCART
    $34.00
    3M Scotch-Weld Epoxy Adhesive DP-2216 is a gray colored, flexible, two-part epoxy. 2:3 mix ratio, 90 minute work life and handling strength in 10 hours. Dispensed with 3M Scotch-Weld EPX II Plus Applicator. 41.5 mL

    Carbon Fiber Roll Wrapped Twill Tube ~ 0.187" ID x 24", Thin Wall Gloss Finish

    FDPT.187*.247*24
    $44.57
    Tube face options available.

    3M Scotch-Weld Low Odor Acrylic Adhesive DP810, black 50ml Duo-Pak

    RMSCTHWLDDP810
    $33.50
    3M Scotch-Weld Low Odor Acrylic Adhesive DP810 is a toughened, two-part black acrylic adhesive. 1:1 mix ratio, 10 minute work life and handling strength in 20 minutes. Dispensed with 3M Scotch-Weld EPX II Plus Applicator. 50ml