Close
All Categories
    ISO 9001 Certification
    PrevEconomyTube™ Braided Carbon...
    NextEconomyTube™ Braided Carbon...

    EconomyTube™ Braided Carbon/Yellow Kevlar Round Tubing ~ 0.75" ID x 96"

    $241.88
    Tubes over 90" long have high shipping costs due to length. We offer one free cut to reduce length and save on your shipping costs. Contact us with your desired cut length. (cut tolerance is -0, +0.25")
    SKU: FDPBET-DIA*.75x96G*KH*

    Please Allow 3-5 days before this item ships

    DragonPlate all-braided Carbon/Kevlar tube is a hybrid component that trades off much of the stiffness of the carbon fiber for the aesthetics of a carbon/Kevlar blend. Comprising 50% carbon fiber and 50% Kevlar both evenly distributed, this tube provides a lightweight solution to achieve the look of carbon/Kevlar braid. The standard braided tube or twill roll-wrapped tube with carbon/Kevlar face ply are recommended if the carbon/Kevlar look is desired, but greater rigidity and strength are required.

     

    0.75" ID with 0.045" wall thickness. Finish is gloss.

    DragonPlate all-braided Carbon/Kevlar tube is a hybrid component that trades off much of the stiffness of the carbon fiber for the aesthetics of a carbon/Kevlar blend. Comprising 50% carbon fiber and 50% Kevlar both evenly distributed, this tube provides a lightweight solution to achieve the look of carbon/Kevlar braid. The standard braided tube or twill roll-wrapped tube with carbon/Kevlar face ply are recommended if the carbon/Kevlar look is desired, but greater rigidity and strength are required.

     

    0.75" ID with 0.045" wall thickness. Finish is gloss.

    Products specifications
    Length 96"
    Wall Thickness 0.045"
    Shape Round
    Inner Diameter 0.75"
    Outside Diameter 0.84"
    Tube Finish Gloss
    Ply Orientation Woven 0/90
    Max Temperature 140 F
    Fiber Modulus Standard (33 Msi)
    Composition Carbon/Kevlar Hybrid
    Approx. Weight 0.619 lb
    Approx. Density 0.057 lb/in3
    Customers who bought this item also bought
    Picture of 0.75" Threaded End Connector

    0.75" Threaded End Connector

    FDPCK-MODCON.75-END-THRD
    From $12.50
    Thread is 1/4"-20.

    Tubes Compatible With This Connector

    Picture of 0.75" Threaded End Connector with Stud

    0.75" Threaded End Connector with Stud

    FDPCK-MODCON.75-END-STUD
    From $12.71
    Stud thread is 1/4"-20, 0.25" or 0.75" stud length.

    Tubes Compatible With This Connector

    5968

    Stainless Steel Black Oxide Bolt - 0.75" x 1/4"-20 thread

    RM1/4-20X3/4BHCS
    $0.45
    Picture of 3M Scotch-Weld Epoxy Adhesive DP-2216 Gray 41.5ml Duo-Pak

    3M Scotch-Weld Epoxy Adhesive DP-2216 Gray 41.5ml Duo-Pak

    RMDP2216DUOCART
    $34.00
    3M Scotch-Weld Epoxy Adhesive DP-2216 is a gray colored, flexible, two-part epoxy. 2:3 mix ratio, 90 minute work life and handling strength in 10 hours. Dispensed with 3M Scotch-Weld EPX II Plus Applicator. 41.5 mL
    Carbon Fiber Roll Wrapped Uni Tube ~ 0.875" ID x 24", Gloss Finish

    Carbon Fiber Roll Wrapped Uni Tube ~ 0.875" ID x 24", Gloss Finish

    FDPT.875*.049*24
    $42.75

    DRAGONPLATE CUSTOMERS

    U.S. Army
    Woods Hole Oceanographic Institution
    NASA
    Northrup Grumman
    United States Department of the Navy
    Raytheon
    Gibson
    Bell Helicopter
    Information
    Customer service
    My account
    Contact Us
    • 321 Route 5 West, Elbridge, New York 13060
    • 315-252-2559
    • Mon-Fri 8:30am - 5:00pm ET
    Copyright © 2024 DragonPlate. All rights reserved.