Loading...

Sorry - this product is no longer available

Twill Weave Carbon/Kevlar (Yellow) Veneer 24" x 24"

$173.24
SKU: FDPLKHV_2424
*
*

DragonPlate real Carbon/Kevlar veneer, our thinnest product, is well suited for covering large surfaces or for decorative trim. Comprising 50% carbon fiber and 50% Kevlar in a twill weave, this veneer presents a unique black and yellow appearance. The gloss and matte finishes provide any project with a distinctive Carbon/Kevlar facade. Sheets are available as large as 4' x 8', yet the material forms into a cylinder as small as 1 inch. Because Kevlar is a tough material, it may be slightly tougher to trim than our standard carbon veneers. Can also be used for outdoor applications as we utilize a UV resistant resin that extends the life of the part and finish under sun exposure. Decals may simulate the look of carbon fiber from a distance, but up close there is little comparison to the DragonPlate finish.

Please allow 5-7 days before this product ships.

Also see other Kevlar Composites we manufacture.

DragonPlate real Carbon/Kevlar veneer, our thinnest product, is well suited for covering large surfaces or for decorative trim. Comprising 50% carbon fiber and 50% Kevlar in a twill weave, this veneer presents a unique black and yellow appearance. The gloss and matte finishes provide any project with a distinctive Carbon/Kevlar facade. Sheets are available as large as 4' x 8', yet the material forms into a cylinder as small as 1 inch. Because Kevlar is a tough material, it may be slightly tougher to trim than our standard carbon veneers. Can also be used for outdoor applications as we utilize a UV resistant resin that extends the life of the part and finish under sun exposure. Decals may simulate the look of carbon fiber from a distance, but up close there is little comparison to the DragonPlate finish.

Please allow 5-7 days before this product ships.

Also see other Kevlar Composites we manufacture.

Products specifications
Sheet Size 24" x 24"
Sheet Thickness Veneer
Ply Orientation Woven 0/90
Max Temperature 140 F
Fiber Modulus Standard (33 Msi)
Composition Carbon/Kevlar Hybrid
Adhesive Backing Option? Yes
Approx. Weight 0.594 lb
Approx. Density 0.044 lb/in3
Customers who bought this item also bought

Quasi-isotropic Carbon Fiber Angle 3/32" x 1" x 96"

FDPL-A03x96
From $403.53
One free cut with angle purchase.

DragonPlate Carbon Strip (Rectangle) ~ 1.2mm x 50mm x 48"

FDPS1.2MMX50MM*48
From $31.60

Twill Weave Red/Black Veneer - Gloss - 24" x 24"

FDPLKHRVG2424
$173.24

3M Scotch-Weld Epoxy Adhesive DP420NS Black 50ml Duo-Pak

RMSCTHWLDDP420NSBLK1.7
$49.75
3M Scotch-Weld Epoxy Adhesive DP420NS is a black, non-sag, toughened, two-part epoxy adhesive. 2:1 mix ratio, 20 minute work life and handling strength in approximately 2 hours. Requires EPX Plus II applicator gun to dispense. 1.69oz/50ml
Loading...