Close
All Categories

    DragonPlate Carbon Fiber Balsa Core ~ 3.5MM x 6" x 6"

    $31.60
    Part Number: FDPLBC3.5MM*0606
    *

    Our carbon fiber balsa core laminate offers a very high strength and stiffness to weight ratio. End grain balsa provides exceptionally high shear, tensile and compressive strengths. Balsa is also a renewable resource, with typical balsa trees maturing to 90 feet in seven years.

     

    The lay-up design is quasi-isotropic, symmetrical, and balanced with approximately 0.03 inches of carbon on each side of the end grain balsa core.

     

    Available in gloss, matte or texture on one side and texture on other side for bonding to other surfaces.

    Our carbon fiber balsa core laminate offers a very high strength and stiffness to weight ratio. End grain balsa provides exceptionally high shear, tensile and compressive strengths. Balsa is also a renewable resource, with typical balsa trees maturing to 90 feet in seven years.

     

    The lay-up design is quasi-isotropic, symmetrical, and balanced with approximately 0.03 inches of carbon on each side of the end grain balsa core.

     

    Available in gloss, matte or texture on one side and texture on other side for bonding to other surfaces.

    Products specifications
    Sheet Size 06" x 06"
    Ply Orientation Woven 0/90 and ±45
    Composition CF (Woven) and Core
    Max Temperature 140 F
    Core Material Balsa Wood
    Fiber Modulus Standard (33 Msi)
    Customers who bought this item also bought

    Double/Bubble Black Regular Setting Epoxy Adhesive

    FDPDBLBUBLBLACK
    $1.50
    HARDMAN Regular-Setting Epoxy is a two component, room temperature cure epoxy system designed to set in 45 minutes in a thin (10 mil) film. 3.5 gram foil pack.

    DragonPlate Carbon Square Tube ~ .250" x .250" (.180 ID) x 24"

    FDPST.250*.250*24
    From $4.58